Belmar rig

[Gerry Zagorski]

Originally Posted by Rocknrolla

Thank you! I think I got it now. I had some spare time this afternoon and decided to use my imagination Is this how it supposed to look?

Tie alberto knot to connect 24-36 inches mono leader to main line. Fold the mono leader in half and tie a double overhand knot.

Below overhand knot, There is 12-18 inches ‘double lined’ mono leader with sinker attached to the end.

4 inches above the sinker loop, use loop-loop connection to attach snelled hook.

Tie an overhand knot over the loop-loop connection.

You got it Rockn and yes the line is doubled to avoid abrasion. Only thing I would suggest you do is use more then a 36 inch piece of mono to start... I use 10 feet or so... The advantage of a longer leader/top shot is when you eventually break off a rig, it's usually at the hook or sinker... Now you have the rest of that mono to tie another rig and you don't have to tie another Alberto knot to join the braid to a new piece of mono... This helps you get back in the water faster and when it's really cold you don't have to tie as many knots.

Lots of variations to this rig and here's a few....

1) You can put a 2nd hook on your snell called a slider... You don't tie this hook, it's meant to slide up and down the hook leader and you can either run 2 hooks through the same crab or a crab on each...

2) Rather then double the last 18 inches you can use one line.... Tie a dropper loop in it for your snell, 4 inches below it a perfection loop for your sinker. Some guys tie one simple overhand knot between the dropper loop and sinker... The theory here is that a single overhand knot weakens the line between the hook and sinker... You hook a fish and the sinker is snagged the sinker breaks away and your still have your hook in the fish.

All this talk about Blackfish is giving me the itch....