Belmar rig

[Rocknrolla]

Originally Posted by Gerry Zagorski

Last 12 to 18 inches of your mono top shot is doubled with a double overhand knot at the top. Now you have a double mono loop that is 12 to 18 inches long.

Run the end of the double loop through the sinker eye and over the sinker to secure it at the bottom of the loop....

4 or so inches above the sinker make a loop out of the doubled line and take your pre snelled hook loop and slide it over the double line loop and run the hook and leader through the loop...

Secure the hook loop from siding up and down the double leader by tying a double overhand knot over it.

The hook should always hang below the sinker to reduce the risk of your bait getting tangled up on you leader. Stiff leader is best for the hook snell since the stiffness will also help keep your bait from tangling back on the leader.

Thank you! I think I got it now. I had some spare time this afternoon and decided to use my imagination Is this how it supposed to look?

Tie alberto knot to connect 24-36 inches mono leader to main line. Fold the mono leader in half and tie a double overhand knot.

Below overhand knot, There is 12-18 inches ‘double lined’ mono leader with sinker attached to the end.

4 inches above the sinker loop, use loop-loop connection to attach snelled hook.

Tie an overhand knot over the loop-loop connection.