Trolling Motor Prop?

[Ken Lyons]

It's really a simple hack to fit the three bladed Motorguide prop to th equivalent Minn Kota. It's quieter, faster and at the slower speeds is way more efficient. It's not even close. It's a better prop.

[NorthJerzyG]

Originally Posted by KenL

It's really a simple hack to fit the three bladed Motorguide prop to th equivalent Minn Kota. It's quieter, faster and at the slower speeds is way more efficient. It's not even close. It's a better prop.

Easy as in just drilling out the center? Or does the pin fit differently? I'm interested........

[Ken Lyons]

The fit is sloppy back and forth on the armature. It will slide right on but you have to use a spacer to fill the slot at the front. Two small pieces of drill,rod, one on each side thus leaving the center of the hub open. If you look inside the hub you should be able yo see what I mean. I use it on my kayak and if all i do is fish with little or no high speed travel the battery reads over 90% after 3 or even 4 hrs. It's as good in weeds as the Minn-Kotas.