![]() |
![]() |
![]() | ![]() | |
![]() | ![]() | |
![]() | ![]() | |
![]() |
|
NJFishing.com Boating Use this board to discuss anything related to boats and boating in NJ |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() When towing by boat is it better to leave the outboard in neutral and let the prop spin freely or put it in gear to restrict spinning ?
|
#2
|
||||
|
||||
![]() Unless you're going over 100mph you don't have to worry about thrust wear. Thrust wear is because the wind is pushing the prop along the shaft pulling aft. LIke you back up.
Makes no difference neutral or in gear. Curious. Why would you want to put it in gear?
__________________
Capt. Debs Tow boat captain/salvor 50 ton USCG Master NJ Boating College- Lead Instructor Big time hottie crabber ![]() |
#3
|
|||
|
|||
![]() Hey Capt Frank
I leave it in neutral, just was wondering it that was the preferred thing to do. Thanks for the post.... Walt |
#4
|
||||
|
||||
![]() I usually have the motor in neutral just in case the prop hits anything. Less likely to damage the lower unit if you hit something harder than the prop.
Just my thoughts
__________________
I may not agree with what you say.... But I will defend with my life for your right to say it |
#5
|
||||
|
||||
![]() My 2008 25 hp Merc EFI manual says leave it in REVERSE.
Not sure of the logic of that. The wind in not ever going to be strong enough to turn it. Ever try to pull start? Pitcure a violent pull start except now your leverage is only the radius of a prop blade? And if THAT strong will probably bend the blade(s). Quote:
__________________
Capt. Debs Tow boat captain/salvor 50 ton USCG Master NJ Boating College- Lead Instructor Big time hottie crabber ![]() |
#6
|
|||
|
|||
![]() For what is worth I always put my motor in forward when trailering!! I do not know why other then is is my habit!!
|
![]() |
|
|