 |
|
Message Board
|
|
 |  | |
 |  | |
 |  | |
 | ||
|
|||||||
| NJFishing.com Bait and Tackle Talk Use this board to talk about Bait and Tackle and see offers from our Bait and Tackle Sponsors |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
11-04-2014, 09:44 AM
|
|||
|
|||
Re: Avet Lever Drag Adjustment
Ok thanks Gerry. I'll call them to figure out if I can get by with just the washers. I'd love to keep the bait setting if possible since I do a lot of kite fishing with very light drag however if I need to lose it to get the drags right so be it.
As for the field testing, we're just starting to get into sailfish season... Last edited by Sails and Tales; 11-04-2014 at 09:47 AM.. 
|
|
#2
11-04-2014, 11:24 AM
|
||||
|
||||
|
Re: Avet Lever Drag Adjustment
The guy in customer service is great. Let me know what you find out Sails. I was told you needed both the cam and the washers and you have to remove the Pusher Bushing you can see in the schematic above in my earlier post.
I'm likey to be headed down to Port Saint Lucie in January to visit some family. Is that a good time for sailfishing?
__________________
Gerry Zagorski <>< Founder/Owner of NJFishing.com since 1997 Proud Supporter of Heroes on the Water NJFishing@aol.com Obsession 28 Carolina Classic Sandy Hook Area 
|
|
|
|
Hybrid Mode
