NJ Fishing Advertise Here at New Jersey's Number 1 Fishing Website!


Message Board


Talking Fluke Regs with Gerry Z. - NJFishing.com Your Best Online Source for Fishing Information in New Jersey


Message Board Registration       FAQ

Go Back   NJFishing.com Your Best Online Source for Fishing Information in New Jersey > NJFishing.com Salt Water Fishing
FAQ Members List Calendar

NJFishing.com Salt Water Fishing Use this board to post all general salt water fishing information. Please use the appropriate boards below for all other information. General information about sailing times, charter availability and open boats trips can be found and should be posted in the open boat forum.

Reply
 
Thread Tools Display Modes
  #1  
Old 02-02-2024, 08:13 AM
Chrisper4694's Avatar
Chrisper4694 Chrisper4694 is offline
NJFishing.com Old Salt
 
Join Date: Oct 2014
Location: hopatcong, nj
Posts: 4,375
Default Talking Fluke Regs with Gerry Z.

If you missed it, last week's episode, we had Gerry Z. come on so we could all argue about current, future, and potential fluke regs... Joe Santiago wants us to be required to register each of our catches to the government so feel free to come bash him 🤣

Episode youtube link below

https://youtu.be/-iV-ke5WSLE?si=6PsHk7xANLVMEhna
Attached Images
File Type: jpg NJMSP #41 THUMBNAIL.jpg (20.9 KB, 65 views)
__________________
14’ princecraft, aka The ‘Essential’
12' Tincan (unsinkable aluminum fishing machine)
https://www.fishidy.com/u/Multispeciesmayhem
https://www.instagram.com/chrisper_fishing/
https://www.facebook.com/mat.nelson.54
Reply With Quote
  #2  
Old 02-02-2024, 09:25 AM
frugalfisherman frugalfisherman is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Posts: 2,164
Default Re: Talking Fluke Regs with Gerry Z.

Just a note. You can make a thick fluke fillet a thin one for stuffing by GEEEENTLY pounding with the bottom of a pan.
Reply With Quote
  #3  
Old 02-02-2024, 11:29 AM
hammer4reel's Avatar
hammer4reel hammer4reel is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Posts: 4,225
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by Chrisper4694 View Post
If you missed it, last week's episode, we had Gerry Z. come on so we could all argue about current, future, and potential fluke regs... Joe Santiago wants us to be required to register each of our catches to the government so feel free to come bash him 🤣

Episode youtube link below

https://youtu.be/-iV-ke5WSLE?si=6PsHk7xANLVMEhna
Podcast was good till your buddy went off the rails .

Think he needs to understand a day on the salt is a lot more expensive a day than when we run a tin boat on sweet water .

I can fish for a month on my jet boat on lakes and rivers for what I spend for 1 day Oceanside
__________________
Captain Dan Bias

Fifty pound + , Striped Bass live release club
Reply With Quote
  #4  
Old 02-05-2024, 01:34 PM
Chrisper4694's Avatar
Chrisper4694 Chrisper4694 is offline
NJFishing.com Old Salt
 
Join Date: Oct 2014
Location: hopatcong, nj
Posts: 4,375
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by hammer4reel View Post
Podcast was good till your buddy went off the rails .

Think he needs to understand a day on the salt is a lot more expensive a day than when we run a tin boat on sweet water .

I can fish for a month on my jet boat on lakes and rivers for what I spend for 1 day Oceanside
Hey I tried to tell him... I think he might be a commie 😂
__________________
14’ princecraft, aka The ‘Essential’
12' Tincan (unsinkable aluminum fishing machine)
https://www.fishidy.com/u/Multispeciesmayhem
https://www.instagram.com/chrisper_fishing/
https://www.facebook.com/mat.nelson.54
Reply With Quote
  #5  
Old 02-05-2024, 01:35 PM
Chrisper4694's Avatar
Chrisper4694 Chrisper4694 is offline
NJFishing.com Old Salt
 
Join Date: Oct 2014
Location: hopatcong, nj
Posts: 4,375
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by frugalfisherman View Post
Just a note. You can make a thick fluke fillet a thin one for stuffing by GEEEENTLY pounding with the bottom of a pan.
Hmmm, that's interesting. Might have to try that
__________________
14’ princecraft, aka The ‘Essential’
12' Tincan (unsinkable aluminum fishing machine)
https://www.fishidy.com/u/Multispeciesmayhem
https://www.instagram.com/chrisper_fishing/
https://www.facebook.com/mat.nelson.54
Reply With Quote
  #6  
Old 02-05-2024, 06:45 PM
hammer4reel's Avatar
hammer4reel hammer4reel is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Posts: 4,225
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by Chrisper4694 View Post
Hey I tried to tell him... I think he might be a commie 😂
You absolutely did , but seemed to not want to hear you lol
__________________
Captain Dan Bias

Fifty pound + , Striped Bass live release club
Reply With Quote
  #7  
Old 02-06-2024, 03:23 AM
FishingSinceIWasThree FishingSinceIWasThree is offline
NJFishing.com Regular
 
Join Date: Sep 2019
Posts: 44
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by hammer4reel View Post
Podcast was good till your buddy went off the rails .

Think he needs to understand a day on the salt is a lot more expensive a day than when we run a tin boat on sweet water .

I can fish for a month on my jet boat on lakes and rivers for what I spend for 1 day Oceanside

I'm not off the rails...and I don't appreciate your comment. Look around you. Just because you have yours, the hell with everyone else?

This country will fail with an attitude with yours and then there will be much bigger problems than fluke regulations. Luckily, other people are currently sacrificing greatly so that you can have fun on your jet boat. You should join them. Or at least keep the cowardly and selfish feedback to yourself.
Reply With Quote
  #8  
Old 02-06-2024, 09:19 AM
Gerry Zagorski's Avatar
Gerry Zagorski Gerry Zagorski is online now
Owner NJFishing.com
 
Join Date: Mar 2008
Location: Edison, NJ
Posts: 11,062
Default Re: Talking Fluke Regs with Gerry Z.

Hammer and fishingsinceIwas3.

I think you guys are mistaking each other... The guys Chris was arguing with in the video is Joe Santiago...
__________________

Gerry Zagorski <><

Founder/Owner of NJFishing.com since 1997
Proud Supporter of Heroes on the Water
NJFishing@aol.com
Obsession
28 Carolina Classic
Sandy Hook Area
Reply With Quote
  #9  
Old 02-06-2024, 09:22 AM
hammer4reel's Avatar
hammer4reel hammer4reel is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Posts: 4,225
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by Gerry Zagorski View Post
Hammer and fishingsinceIwas3.

I think you guys are mistaking each other... The guys Chris was arguing with in the video is Joe Santiago...
Gerry that’s who I referred to . The way Fishing since three responded , was as though it was JS

Was nothing in my post about anyone else .
So if fishing since 3 isn’t JS , I have no idea why he responded as he did here
__________________
Captain Dan Bias

Fifty pound + , Striped Bass live release club

Last edited by hammer4reel; 02-06-2024 at 09:24 AM..
Reply With Quote
  #10  
Old 02-06-2024, 07:50 PM
hammer4reel's Avatar
hammer4reel hammer4reel is offline
NJFishing.com Old Salt
 
Join Date: Mar 2008
Posts: 4,225
Default Re: Talking Fluke Regs with Gerry Z.

Quote:
Originally Posted by FishingSinceIWasThree View Post
I'm not off the rails...and I don't appreciate your comment. Look around you. Just because you have yours, the hell with everyone else?

This country will fail with an attitude with yours and then there will be much bigger problems than fluke regulations. Luckily, other people are currently sacrificing greatly so that you can have fun on your jet boat. You should join them. Or at least keep the cowardly and selfish feedback to yourself.
Well since my comment wasn’t addressed to you , I honestly could not give a hoot that you didn’t appreciate it.
Maybe go back and read what I was even talking about , you might see how ridiculous your post is
__________________
Captain Dan Bias

Fifty pound + , Striped Bass live release club

Last edited by hammer4reel; 02-07-2024 at 06:01 AM..
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.