NJ Fishing Advertise Here at New Jersey's Number 1 Fishing Website!


Message Board


side imaging sonar issue - NJFishing.com Your Best Online Source for Fishing Information in New Jersey


Message Board Registration       FAQ

Go Back   NJFishing.com Your Best Online Source for Fishing Information in New Jersey > NJFishing.com Fresh Water Fishing
FAQ Members List Calendar Mark Forums Read

NJFishing.com Fresh Water Fishing Post all your fresh water topics on this board

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 07-15-2016, 07:20 PM
jimmythegreek's Avatar
jimmythegreek jimmythegreek is offline
NJFishing.com Old Salt
 
Join Date: Apr 2008
Posts: 1,212
Default Re: side imaging sonar issue

Ken you can get interference from the TM just being in the boat with other electronics, all depends on your setup. If you have universal sonar in the TM you almost always get interference. I use the ferrite ring trick on all units I wire up regardless of the setup to avoid it, cheap insurance. Ive gone as far as to open up the TM and add a seperate ground wire to the hull if aluminum and that is a guaranteed fix but some ppl worry about warranty on new stuff. Hbirds are worst than lowrance, lowrance is pretty good with their shielding on the transducer wires. You can always turn up the noise filter and you will eliminate any interference, but I like many wanna see every blip and baitfish possible, I run my sonar raw with no filters, after a while you can tell what everything is just takes some time to play with it and learn it.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.