What is it?

[BCinerie]

I think it is a ground, how would you attach? In a real pia spot

[BCinerie]

Another pic

[Rubberhead]

Solder

[Gerry Zagorski]

What is that black tub alongside it? A fuel tank or bait well or something?? Was the photo taken in the bilge of a boat??

Give some more context and maybe we can figure out what it is and what it does.

[BCinerie]

Back side of 140 evinrude motor still runs great . Was going over for spring splash. Saw it hanging. Turn image on side for better perspective

[Rubberhead]

Looks like a ground strap

[Gerry Zagorski]

Yep - My guess would be a ground wire as well. Looks to me like the terminal lug at the end has corroded away.. There should be a circle at the end were a bolt goes through and the bolt screws into a metal part of the engine to provide a ground.

Looks like you have a hole with nothing in it and that is perhaps where the terminal lug is supposed to be bolted to and the bolt is missing as well...

If that is the case you will need to crimp a new terminal lug on, find a screw to fit that empty hole and mistery solved.

If it turns out that the empty hole I'm reffering to is not a bolt hole, that wire had to lead somewhere so I would simply see where you can stretch that wire to, to find out what it was attached to.

[Gerry Zagorski]

Spot welding would not be a good idea... You want find out exactly where that wire went and make sure it goes back on the same place.

It think it might be part of your engine/boat bonding system which helps protect metals that are exposed to saltwater from Galvanic Corrosion. If you keep your boat in the water this is very important along with keeping up with your zincs.

[BCinerie]

Update, I ended up turning the motor all the way to one side which allowed enough room to drill out the old rivet? and I put in a screw!!! Good as new!! Splash her this Friday!!!