NJ Fishing Advertise Here at New Jersey's Number 1 Fishing Website!


Message Board


NJFishing.com Your Best Online Source for Fishing Information in New Jersey - View Single Post - First boat..need help
View Single Post
  #3  
Old 04-11-2025, 02:03 PM
Gerry Zagorski's Avatar
Gerry Zagorski Gerry Zagorski is online now
Owner NJFishing.com
 
Join Date: Mar 2008
Location: Edison, NJ
Posts: 11,716
Default Re: First boat..need help

Quote:
Originally Posted by Polelock View Post
Hi Anthony, a 16 foot Deep V with a 9.9 will work well for RV or SR as well as any other NJ lake/reservoir. Max hp in RV and SR is 10hp. Greenwood and Hopatcong allow larger HP. Most other lakes will be electric only. Do you really need a 90hp? Just another motor to maintain if you do not use it.
I've seen the Crestliner 1640 on FB. What year is the boat & motor? I do not like side consoles but that's me. You have to worry about the old control cables as well. With older motors, you never know what you are going to get. If the boat is clean and is in good shape, chances are the owner took care of the motor as well. I have had 5 different 2 strokes from 96-2004 that all ran perfect.
I've had numerous boats over the years and just bought a 1997 16ft Monark 16sc. The boat was garage kept and solid. I had a new 9.9 that I put on it. This will be my last boat..
You may be able to find a decent boat with no motor and the just buy a new motor. You will then know you have a reliable outboard.
-Don't be in a rush.
-Find a boat layout that fits your need.
-If it has a motor, ask the owner to run it. Engage Fwd and Rev. Make sure it runs and has a steady stream of discharged cooling water. Shut it down and start again.
-Check the trailer. Tires dry rotted? Leaf springs look good? Lights work?
Good luck in your search.
Some great advice above... Most of what you'll be looking at will be aluminum and a good choice for the 10 horse minimum lakes since they are lighter then fiberglass and don't need as much horsepower to push them. I'd be trying to find a welded one instead of rivets since rivets are more prone to leaking, especially older ones but I would not consider it a deal breaker. If you'll be using it on larger lakes or in foul weather, a deep V is the way to go since it's better while underway in chop, if not semi V or flatter bottom might be better for you since they require less power and are not as tippy on the drift as a deep V but will pound a lot harder in chop.

If you plan to fish a lot, an electric trolling motor with spot lock would be on my short list of upgrades, it makes fishing so much better and easier. If however you plan to take it in any salt water, you'll want one rated for salt water use...

Not too familiar with the brands so I can't help you there but here is an article that might help give you some insight https://www.boattrader.com/research/...luminum-boats/
__________________

Gerry Zagorski <><

Founder/Owner of NJFishing.com since 1997
Proud Supporter of Heroes on the Water
NJFishing@aol.com
Obsession
28 Carolina Classic
Sandy Hook Area
Reply With Quote