![]() |
Need shad help.
Got the jet drive ready to hit the Delaware tomortow. Where is the preferred area to shad fish in the river? Deepest channel? Middle? Sides? Never knock it out of the park with shad so I want to improve on that. Any advice appreciated. |
Re: Need shad help.
keep a good eye on the other boats its a good way to see what the bite is like that day. every day seems to be different with the cold water 47 deg yesterday.
|
Re: Need shad help.
i'll be looking to get my first shad this year, but will probably be doing it from shore. hopefully not a big learning curve on catching some! good luck!
|
Re: Need shad help.
lambertville bridge area is always good. preferred methods are downriggers w a nice lead staying kinda low in the water column. also poor mans downriggers work well, use a shad rap maybe #7 or similar and pull the hooks and run a few ft leader off it to a shad spoon, the shadrap makes it dive and bounce. try diff colors, it matters, and pop your lines w your hands to give extra action to the shadraps. as said watch the other boats and see what theyre doing. Many areas of the river you dont need a jetdrive but you ALWAYS need a good river anchor, thats the #1 piece of hardware in my opinion..good luck
|
Re: Need shad help.
Tom and I hit the river by bulls island today. Picked up half dozen and lost about the same. Caught on all methods, but I think weighted flat line was the best. Fished a seam in about 10 ft about three ft off bottom.
|
Re: Need shad help.
You got a Jet Drive Yak Bro? That's Sick!!!:D
|
Re: Need shad help.
Phillipsburg, you can launch from either side ( NJ or PA ) and fish at the confluence of the Delaware and Lehigh rivers, drove over there today and about a dozen boats bouncing darts there. Water is plenty deep in that area. PM me if you need more info
|
Re: Need shad help.
1 Attachment(s)
That would be sweet! Your a mechanic, can ya help me get this motor on the yak? |
Re: Need shad help.
Sweet ride! Keep it out of SRR & GREENWOOD UNLESS YOU HAVE SCUBA TO CLEAN OUT THE INTAKE!
|
Re: Need shad help.
Quote:
|
| All times are GMT -4. The time now is 08:37 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.