Adding on/replacing braid
 

I lost about 100 yds of 65 lb braid from my tile reel. Wondering if I should splice it or strip and start over. If splicing, what knot would be best?

Re: Adding on/replacing braid
 

I would do a splice with a uni to uni knot. I've similar situations and spliced with out any problems what so ever. I've had my splices with the uni to uni knot hold up for a couple years with like diameter braid as yours.

Re: Adding on/replacing braid
 

You could reverse the line and put the splice and added line against the spool.

Re: Adding on/replacing braid
 

uni-uni worked for me.

Re: Adding on/replacing braid
 

uni to uni wet it pull tight let dry put a drop of super glue on it, let super glue dry and finish it up

Re: Adding on/replacing braid
 

uni to uni will do the trick

Re: Adding on/replacing braid
 

Great suggestion. Will probably never get to see the splice with this suggestions. Uni to uni is probably the easiest and fastest. Very reliable but not the lowest profile.

Re: Adding on/replacing braid
 

Uni to Uni has been my go to knot but as Alex mentioned it has a fairly large profile and will sometimes stick in the guides. I've been using the Alberto knot. Very esay to tie and it seems to go through the rod eyes better.

http://www.youtube.com/watch?v=J56O3CZVu7M

Re: Adding on/replacing braid
 

watched that video on the Alberto knot.. looks like an easy one to tie.. will give it a try this season

Re: Adding on/replacing braid
 

Jeff this has been my goto top shot knot and it works well. Although I haven't tried it for pp to pp.