Uni to uni knot problem
 

For the first time, ever, I had broken my 50lb mono top shot tied to 65lb braid at the knot. All that was left was the mono wraps above the braid wraps. Almost like the braid knot cut the mono. Very strange to say the least as I tied this thousands of times and never had this problem. Anyone else ever have this problem?

Re: Uni to uni knot problem
 

sounds like a week spot, could hit a eye wrong and put a small cut in the mono.

Re: Uni to uni knot problem
 

It happened 3 times in a row on one trip. Same rod and reel the next trip, it was fine.

Re: Uni to uni knot problem
 

I had the same problem. With 50# mono, the pull needed to break it often caused the braid to cut the mono. I no longer use that not but developed my own, which has never failed me. If I was more computer handy I would show you how to tie it. It is easy and very strong.

Re: Uni to uni knot problem
 

Re: Uni to uni knot problem
 

When you tie the knot do the braid first. Wrap it twice around the mono before making the knot. Make sure the knots are pulled tight against each other so you you don't get any sort of "sawing" action.

Re: Uni to uni knot problem
 

I'm no pro...but there is an app and probably a website called knot wars. It's part of the tv show on NBC sports network. It gives you video tutorial on almost every knot out there. It has a few knots you can use in place of uni to uni. Awesome app...you should check it out. Very detailed info about every knot. Knot wars.com

Re: Uni to uni knot problem
 

There are better knots for braid to mono than uni to uni.

Re: Uni to uni knot problem
 

I'm a big fan of the Albright

http://www.youtube.com/watch?v=2R_2xautA1U

Re: Uni to uni knot problem
 

Thanks for sharing, and easy to do. Definitely will give this knot a try. I never really had a problem with uni to uni. This is definitely a stronger knot. :D