sea bass on the iron!!
 

crazy good jig bite all weekend for the sea bass.saturday was a bit of a struggle
with the poor anchoring conditions but once we got them going it was game on.
sunday we started the day with those same conditions but once that wind came up it went right to an all out slaughter.it was drop and reel sea bass for all.i had to take the teaser off at one point just to get a break.silver or gold 27's seemed
to be the ticket.

Re: sea bass on the iron!!
 

Nice job BD.

How deep you fishing?

Re: sea bass on the iron!!
 

65-85ft

Re: sea bass on the iron!!
 

Nice. Was just wondering how deep you were getting that 27 down without letting out a ton of line.

Re: sea bass on the iron!!
 

was wondering the same thing did the 27 hold bottom

Re: sea bass on the iron!!
 

It's my favorite way to catch seabass........Period! We have been catching them on the old Lucanus jigs and the new Lucanus flat fall round jigs. I've converted the Shimano Coltsniper jig by replacing the treble hook with an assist hook. The seabass we have been catching are filled with tiny sandeels along with a few crabs and even small lobsters. Because of the variety of bait, all of the previously mentioned jigs worked wonders on the open bottom in 80 feet.

We do our fishing from our own boat so using jigs is much easier than from a crowded party boat. Since we drift and don't anchor, we've learned how to keep a light jig near the bottom and still avoid tangles. We cast our jigs downwind or in the direction of the drift and free spool until it hits bottom. As the boat drifts with the wind or current it catches up with the jig and we follow the jig past the boat until there is a little scope before we reel in and start again. The real trick is for everyone to go back to the head of the line once you reel in so everyone can keep following their jigs. Once at the head of the line, cast again in the direction of the drift and get back in line. It's a choreographed dance where everyone keeps moving and fishing.

By doing it correctly, you can use a lighter jig and keep it in the zone longer without having to go to a much bigger jig with their bigger hooks. It's a team effort, but it really works. From a boat anchored in a current, it's important to cast your jig up current so it gets down as it gets near the boat so you can fish it vertically for a longer time. You'll catch more fish on jigs if you can keep them fishing vertically.

Hope it helps. Good luck.

Re: sea bass on the iron!!
 

Keep in mind it doesn't have to "hold". It just has to get down there. As long as you can stay relatively vertical you should use the lightest jig possible. 27's are by far the best but there are days where you can get away with 17's. Again, just make sure you stay vertical!

Re: sea bass on the iron!!
 

no problem getting a 27 down and as Allen has said i am not trying to hold bottom.as far as being in a crowded situation,learn to flip a jig and that all goes away.i was hooking them 30-40ft off the bottom too.they will chase a jig right up to the top.

Re: sea bass on the iron!!
 

Great info Ed! Thanks for the info!