What is your favorite penetrating oil?
So what is your favorite penetrating fluid any which ones have you tried? I just made a video on a homemade penetrating fluid that I have found to work the best so I wanted to share. Stuck bolts and breaking bolts is the worst but I havent had any problems since using this!
Let me know what you think! And if you have tried this before! I am always down to try new recipes people have! **Also, if the video was helpful, give it a “thumbs up” on YouTube (it helps me out, thanks)*** https://www.youtube.com/watch?v=2WuVBFTzoKc&lc |
Re: What is your favorite penetrating oil?
Quote:
|
Re: What is your favorite penetrating oil?
PB Blaster works great
|
Re: What is your favorite penetrating oil?
I've used the ATF/Acetone mix myself before, works great.
|
Re: What is your favorite penetrating oil?
I'm with Duff on the break fluid.... If you have a pair of old plyers that are hard to open and close due to corrosion, soak them in break fluid... Also had a set of sockets and wrenches on the boat that rusted all up.... Got a rag soaked it in break fluid , wiped everything down and they are almost as good as new.
|
Re: What is your favorite penetrating oil?
My favorite penetrating oil?
KY:eek::D |
Re: What is your favorite penetrating oil?
1 Attachment(s)
Quote:
Not that there's anything wrong with that! :D |
Re: What is your favorite penetrating oil?
I tried the brake fluid and ATF mixture on a hydraulic cylinder that would not come apart. We left it soak over the weekend and on Monday morning we were able to disassemble the cylinder by hand.
Thanks for the information. |
Re: What is your favorite penetrating oil?
Quote:
|
Re: What is your favorite penetrating oil?
I agree on the PB Blaster.
|
All times are GMT -4. The time now is 02:49 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.